Category: Blog

We just finished up a floor job of refinishing the living room, dining room, and office. The homeowner requested aged barrel stain for the floors. The left column of photos are the “before” and the right column are the “after”.

 

This stairway was blond and the homeowners wanted a darker color. We sanded the previous dish and stain off and put dark walnut stain on the woodwork. We used an oil base finish for the sealant.

They also wanted the wood accents in the living room done along with the mantle.

A customer asked for 4 floating shelves that are stained a rich walnut color. We said, “Yes sir, we can do that for you.”

Here Warren is cutting the boards at an angle.

 

The boards were put together, stained, and finished.

The shelves installed.

We were able to build and install a new balustrade for this customer.  She had a valute newel post on an extended stair step.  She wanted that step to be cut in line with the others steps.

With the cutting of the bottom step, we then installed new floor boards to blend in with the existing floor.

What unique project! We made oak valances for 13 windows. It fit the house so perfectly. We also made a fireplace facing and mantle that matched.

 

The same folk that needed their staircase rebuilt, also wanted the fake beams replaced be oak beams stained and finished to match the floors we did for them.

This particular house had a Staircase that was in the way of the front entrance. We were able to take out the first step and landing and put in winders to accommodate the space better. We then installed new floor boards and a tall newel post and handrails.

A job we did this week was to refinish a living room floor that originally had carpet when this homeowner purchased the house. He was planning on replacing the carpet and discovered hardwood floor underneath. He then called us to refinish it.
At the front door there was sheet vinyl with under layment stapled down. The staples were quite stubborn to pull out, which more than half of them snapped right off. We had to use vise-grips and end nippers to either pull them out or nip them.  We were amazed how many staples were there just at the front door.
We then sanded the floor which was a dark amber and then stained it to a rich dark walnut color.

This floor had a lot of water damage done right in front of the patio door. After sanding we applied 3 coats of professional grade urethane. The floor brightened up nicely.

When we came to see the balustrade that the homeowner was fussing with it was quite obvious that it needed replaced.

We took out the balustrade rather easily since it was not attached very well. We installed a box newel post we had made, handrail with metal balusters, and a wall handrail.